This kit is a "GSM Based advertisement board" GSM modem is used for receiving and sending SMS. When a user wants to display a notice on the notice board, user will send SMS from a mobile number and SMS received is displayed on LCD.
In the kit access controlled lock system, when unauthorized person tries to open the gate and enters the wrong password, the alarm gets triggered and a SMS is sent to the registered user. The user can take any proper action.
The aim of this project is to monitor for LPG leakage to avoid fire accidents providing house safety feature where security has been an important issue. The system detects the leakage of the LPG using gas sensor and alerts the consumer about the gas leakage by sending SMS.
The aim of this project GSM based "temperature and gas" monitoring system. Here we have used the SMS service. if gas is detected, an SMS is sent to the registered user. If the temperature is above a certain defined level, again the SMS is sent.
The kit advance blind stick consists of stick with many advance features like automatic obstacle presence detection with audio alarm, water body detection in front of the blind person with alarm. If the stick is lost there is small remote through which the person can track the blind stick.
The Intelligent Toll Tax System is a microcontroller based project. Sensors and load cells are being provided which sense the type of vehicles and after receiving the money then only the gate will open automatically and will close after the vehicle passes. The data can be logged in PC also.
In this kit PC based data logging we are trying to monitor some environmental conditions like temperature and humidity and storing them in computer for further processing. If the temperature or humidity exceeds a limit then an alarm gets generated. Also the data gets stored with time and date in computer.
In our kit, we are monitoring four parameters, Temperature, Humidity, LPG gas and light sensor. These parameters are monitored and according to the set threshold regulate different device to keep the values in range.
This kit smart card based chalan system is an effort to designing a prototype challan system based on RF ID where user vehicle/user can easily be identified and the SMS challan will be sent to the user via GSM modem.
In the kit RFID based unique identification system Radio-frequency identification (RFID) based access-control system allows only authorized persons to enter a particular area of an establishment. The authorized persons are provided with unique tags, using which they can access that area.
Here we designed and electronic control unit using which we can control the stepper motor (speed and direction) remotely just by sending SMS from our mobile. The SMS in sent in a definite format hence can be controlled by definite user.
In the kit vehicle theft intimation if any unauthorized individual tries to start the vehicle the switch would be turned off and a message would be sent to the owner of the car along with the alarm being triggered on. The device also gives the facility to the user to send a SMS and stop the car at any moment he wants.
In the kit password protected secured area if the entered code is correct it sends the signal to the gate to open, if the entered code is wrong then it would activate the theft alarm. This device is helpful in factories and laboratories were there are security concerns.
The kit Home automation system is the use of one or more touch screen to control basic home functions and features automatically and sometimes remotely. An automated home is sometimes called a smart home
In this kit wireless Home automation we are controlling the system with the help of touch screen. As we press the button on touch screen it generates signals and sends them to the microcontroller and sends it to input section of RF transmitter where it is encoded and transmitted
Here we have an energy meter using current sensing concept. This energy meter is prepaid that is recharge and use. The recharge can be done by sending a simple SMS from your mobile phone. If any tampering is done with the meter, an automatic sms will be sent to the registered electricity department.
In the kit GPS based handcuffs here the GPS device used to send the data in its own format, If the user goes out of a given geographical region, the change in latitude and longitude will become than a predefined value and alarm will trigger also the vibration will be there to shock him.
The kit prepaid card for petrol pump contains a RFID card that is loaded with a certain amount of money; as the user swipes his card, the microcontroller would read both the inputs and correspondingly instruct the relay driver to activate/deactivate the relay
In the kit voting system for rigging- free governing examines The finger print scanner is there to scan the finger print and store the database inside it. The microcontroller can ask it anytime to check the validity of the preset finger placed on it.
This kit password based security system to secure an access control with two levels. One is password and the other is finger print. The user has to enter the password correctly, if it gets matched, then the finger print will be scanned. After these two verifications, the gate will be opened.
This kit accident alarm system here can be used to detect accidents with the help of a GPS MODEM; when the car meets an accident and gets toppled, microcontroller will sense it with the help of accelerometer and will read the current location from GPS.
In the kit Weather report information there is DHT sensor which can sense the temperature and humidity and works on one wire communication. The analog sensor LDR can detect the amount of light preset. GSM modem is there to transmit and receive the sms.
The kit industrial protection system works on SMS sent by the user with the help of a GSM modem. The device works by comparing the readings of the smoke sensor, temperature and light sensor with a threshold limit initially set by the programmer.
The kit fastest messaging system mainly aims in designing completely automated menu in restaurants with the help of touch screen sensor and a LCD to provide a user friendly environment. The menu will be displayed automatically on the table
In this kit coin based mobile charger we have tried to reduce the wastage of electrical power which often arises due to negligence of the user. Here we have make a power system in such a way that, the user can use it only for limited period of time after paying for it.
LGEC165: Touch Screen and GSM based fastest messaging system
Here we have designed a one touch fast messaging system to solve these problems. There is a touch screen from which a person can select a user from the group and can select the message. After the selections, he can send the message to the relevant person by pressing ok.
In the kit fingerprint based attendance system, fingers are the main focus because of their characteristics that vary from person to person. This means that two people cannot have identical finger marks whatsoever. In the analysis of fingerprint attendance system project
In the kit SMS based Mesh management system here, the system is designed to minimize the wastage of foods in mesh/ hotel etc. It is suitable for those places, like mesh or hotel etc where the people pay monthly for their flooding.
In the kit location tracking system the purpose of this system is to design and integrate anew system which is integrated with GPS- GSM to provide following features like: Location information, Real time tracking using SMS, track bus driver activity etc.
LGEC178: Pay and use power system using coin sensor
Here we have make a power system in such a way that, the user can use it only for limited period of time after paying for it. A precise coin acceptor is there to accept the coin, and it generates the power
Using this kit Smartphone based home automation we can control our home devices like AC fan, AC bulbs, lights etc using the Bluetooth of our Smartphone. There is an application running in the Android based Smartphone in which there is a GUI for user.
LGEC190: Guiding system for blind person based on GPS, GSM
Here we have designed a device which can help the blind persons a lot. The blind person will have to carry this device with him. Any person who wants to guide the person will have to send a SMS to the device; the device in turn will send the current location in terms of latitude and longitude via SMS.