• Any Questions? Call Us: +91 522 4026611
Get social with us!

LGEC017: New Irrigation System Using GSM
In this kit we are going to explain how to control electrical motors ((Tulu pump) through SMS using a GSM modem and AVR microcontroller. We can also check the water level by sending a SMS.

 4 Days
 Intermediate
 13000

LGEC019: Smart Fan - A Human Tracking Fan
This kit consists of two PIR Sensors which can detect person sitting position and automatic rotate the fan towards human. If both PIR sensor detects the human then fan rote one by one continue. If do not detect any person ,fan will be stop.

 4 Days
 Intermediate
 9000

LGEC021: Race Time Measurement
The project Time Measurement System for Athletics or any car calculates the time without actually using any mathematical calculations. This project uses the wireless concept IR.

 4 Days
 Intermediate
 7000

LGEC044: Atmega Based Street Light Control
The kit Atmega168 based street light control is very useful to automate the street lights on roads, or the lights in stadiums, especially in stadiums where the total intensity of the light is assumed to be constant.

 4 Days
 Intermediate
 9000

LGEC047: Real time device control
In this kit time based device control many times we wonder if all the devices can be automatically switched on or off at a particular time. So we made it possible. In this kit we are using a RTC to control devices and their switch ON itself at a definite time and switch OFF at definite time.

 3 Days
 Intermediate
 9000

LGEC050: Accelerometer based tilt sensor
The objective of this kit is to develop a system with the help of which tilt angle of any vehicle can be calculated. This device can sense the tilt and convert it into voltage in x y z coordinates.

 4 Days
 Intermediate
 7500

LGEC051: Alcohol sensing instrument
It is based on the alcohol sensor MQ3 which detects the alcohol and gives analog output. The analog output is displayed in the form of percentage on the LCD. If the alcohol is detected above a certain threshold level an alarm is generated.

 3 Days
 Intermediate
 8500

LGEC053: Distance Meter Using USS
The project is designed to measure the distance of any object by using an ultrasonic transducer. Ultrasonic means of distance measurement is a convenient method compared to traditional one using measurement scales.

 3 Days
 Intermediate
 8000

LGEC071: Speed And Gear Indicator
This kit is also concerned with design of automatic unit to calculate the speed and gear. A speedometer is a gauge that measures and displays the instantaneous speed of a land vehicle. The kit also feature to change the gear and display it on LCD.

 4 Days
 Intermediate
 8500

LGEC076: PC Controlled Scrolling Display
In this kit, whatever we write on the PC can be used to display on the LCD at a distant place using a microcontroller. These types of systems are required in places, where the customer needs another display unit apart from main display unit of the computer.

 4 Days
 Intermediate
 8500

LGEC084: RTC based water pump controller
In this kit time based device control we made it possible. In this kit we are using a RTC to control devices and their switch ON itself at a definite time and switch OFF at definite time.

 4 Days
 Intermediate
 9000

LGEC094: Automatic Viper
In this project we have made an automatic wiper system. As soon the rain is sensed, the wiper starts moving automatically.

 4 Days
 Intermediate
 9000

LGEC097: Human sensed automatic door control
In the kit human sensed automatic door control in some area where we need only humans to enter, we can use this type of system. Here we have used PIR sensor to detect human beings. As a person is detected by the sensor, the gate gets opened for some time and then gets closed automatically.

 4 Days
 Intermediate
 9000

LGEC099: Timing based solar tracker
This kit timing based solar tracker shows the potential system benefits of simple tracking solar system using a motor and RTC. This method is increasing power collection efficiency by developing a device that tracks the sun to keep the panel at a right angle to its rays.

 4 Days
 Intermediate
 9000

LGEC101: Wireless health monitoring
The system is design of temperature monitoring of patient body wirelessly using multiple sensor network and receiving the data at remote end

 4 Days
 Intermediate
 8000

LGEC103: Wireless encrypted data transmission
This project is used to communicate or transmit a text message from one place to another place through wireless RF medium. The text message entered via keyboard is encoded by microcontroller and the written (encoded) message will be transmitted through wireless.

 4 Days
 Intermediate
 10000

LGEC106: Scrolling Message Display
The main objective of this Kit scrolling message display is to design a system with the help of which we can display the data on a display device by writing the data in PC. The interface is should be easy so that a lay person can also use the system effectively.

 4 Days
 Intermediate
 8000

LGEC108: Toxic chemical level measurement
In this kit to avoid the direct contact of our face with the chemical, we have used a distance sensor, which keep the update of the depth of the chemical. This level will be displayed on a dot matrix LCD.

 4 Days
 Intermediate
 8000

LGEC117: Touch Screen control Stepper motor
The aim of this kit touch screen control stepper motor is to use design and construct a user friendly module that can be used to control the direction and speed of the stepper motor based on touch screen technology.

 4 Days
 Intermediate
 9000

LGEC119: Automatic Wireless Power Grid
In this kit automatic wireless power grid we are controlling the grids with the help of switches. Actually the transmitting end is interfaced to the switches. As we set the time it generates signals and sends them to the microcontroller and sends it to input section of RF transmitter where it is encoded and transmitted with help of antenna.

 4 Days
 Intermediate
 10000

LGEC125: Human Response Time Measurement
This kit human response time measurement is designed to measure the response time of a person in two terms. One is the visual response time and the other one is the audio response time. The visual response time is calculated with the help of a light.

 3 Days
 Intermediate
 7000

LGEC126: Swipe controller for ppt presentation
his kit swipe controller for ppt presentation is designed to provide a unique way to preset a PPT presentation. The slide show is controlled by the movement of the hand over the sensors in different ways. To start the slide show the user has to keep his both hands over the sensors for some interval of time.

 4 Days
 Intermediate
 7500

LGEC128: Keypad security system
The kit keypad based security system concerned here can be used in safe Security projects by industries The device uses a touch screen to send a code of information or a password assigned to the microcontroller On receiving the correct password.

 4 Days
 Intermediate
 10500

LGEC133: Biometric fingerprint identification
In the kit biometric fingerprint identification the finger print scanner is there to scan the finger print. If the user is valid then only the microcontroller opens and closes the locker. The locker is controlled with the help of a relay driver which drives a solenoid.

 4 Days
 Intermediate
 14000

LGEC115: Touch Screen Control DC Motor
The aim of this kit Touch Screen control DC motor is to use design and construct a user friendly module that can be used to control the direction and speed of the DC motor based on touch screen technology.

 4 Days
 Intermediate
 9000

LGEC141: Cellphone controlled street light
Using this system, we can control the street lights by sending an SMS to them. Any user who wants to turn on the light, he can do this by selecting the lights.

 4 Days
 Intermediate
 12000

LGEC148: Intelligent system for hazardous gas
n the kit intelligent system for hazardous gas there are many facilities that need to monitor for hazardous gas leaks in areas where it is not possible to install cabling for power or signal.

 4 Days
 Intermediate
 12500

LGEC151: RFID based Electronic passport
Here we have used the RFID card to store the user information of his pan card. It can be used at several places like in schools, in colleges, in hospitals etc. At the time of registration, the data of all users will be stored in the data base in the computer.

 4 Days
 Intermediate
 9000

LGEC160: PC based two channel oscilloscope
This is a kit PC based two channel oscilloscope running model of PC based two channel oscilloscope for low frequency operation. The AVR microcontroller is there to read the data from its two ADC channels. These data are further sent to the PC.

 4 Days
 Intermediate
 8000

LGEC170: Joystick based wheelchair
This is a kit joystick based wheelchair model of wheelchair, which is being controlled by a joy stick. On any hand of the wheelchair, this joystick can be mounted and the motorized wheels can be controlled on the basis of movement of joystick.

 4 Days
 Intermediate
 10000

LGEC177: 2 level security system
This kit 2 level security system has a touch screen which is used to accept the user input. There is a two level security, at one level, the user has to enter the password, and on the other level he has to enter a pattern on the touch screen.

 4 Days
 Intermediate
 10000

LGEC187: Laser based security system
This kit laser based security system is designed to provide maximum security to a given restricted area where the presence of any person is not desired. If someone tries to pass over the boundary line defined by laser lights, an alarm will be triggered and a sms to the authorized person will be sent.

 4 Days
 Intermediate
 12000

LGEC188: Speed testing system on highways
In the kit speed testing system on highways driving on highway motorist should not exceed maximum speed limit permitted for their vehicle. If speed exceed limit value then an sms send to register user

 4 Days
 Intermediate
 11000

LGEC191: Speed And Direction Control of DC and Stepper Motor
In the kit speed and direction control of DC and Stepper motor DC and stepper motors are important components of any type of industrial automation system where movement is considered.

 4 Days
 Intermediate
 9000

LGEC194: Ultrasonic sensor based smooth breaking system
n the kit ultrasonic sensor based smooth breaking system Obstacle detecting and obstacle avoiding system are used in order to prevent any accidental head-on collision of vehicles.

 4 Days
 Intermediate
 10000