• Any Questions? Call Us: +91 522 4026611
Get social with us!

LGEC003: DTMF Based Typing System.
The main aim of this project to design a typing system where we can type data on remote location on LCD by pressing the mobile buttons on the other mobile in infinite. Any person cannot hack your massage.

 6 hrs
 Intermediate
 7000

LGEC001: DTMF Controlled Door Lock
The main objective of keyless mobile controlled locks system is to unlock a garage door (different type’s door) by a mobile phone using a unique password entered through the keypad of the phone.

 4 Days
 Intermediate
 8000

LGEC002: RF Remote Controlled Door Lock
The main objective of this project to make a wireless remote through which can control the door. The user will have to send password from remote end; the door will be opened for a definite time interval and will be closed automatically.

 4 Days
 Advanced
 8000

LGEC004: Bus Tracking System
In the kit "ON Route Bus Tracking System" we can track the bus at any location by receiving id. For further improvement we can integrate all the collected data from different locations and make a database of it.

 4 Days
 Intermediate
 8000

LGEC005: Gas leakage detection & Auto Off
The aim of this project is to monitor for (LPG) leakage to avoid fire accidents providing house safety feature where security has been an important issue. The system detects the leakage of the LPG using gas sensor and automatic gas knob off.

 4 Days
 Expert
 8000

LGEC006: Wireless water level controller
In this kit Wireless Automatic water level controller switches ON the motor when the water level is below on low level and puts off the motor when water level rises up to high level. And level display on LCD at receiver end.

 4 Days
 Intermediate
 9000

LGEC007: Computer Operated Devices
The objective of this kit is device control using computer. A USB to serial converter module to interface the PC to Microcontroller. The user control the devices by sending Any ASCII code through the dock-light software.

 4 Days
 Expert
 8000

LGEC009: Unique Identification System
In this project there will be a unique id tag for each item. The receiver keeps on receiving the id of items uniquely. If any items is not in the range, means that product id is not display on LCD.

 4 Days
 Beginner
 8000

LGEC013: Military Radar Using IR
This project is used to security purpose. The kit automatically detects the any moving person. If any person in front of IR then detect that and stepper motor will be stop. deflection angle will be display on LCD.

 4 Days
 Intermediate
 6000

LGEC014: Wireless Home Automation
The basic idea behind this kit is device control using computer wirelessly. A USB to serial converter module to interface the PC to Microcontroller. The user control the devices by sending Any ASCII code through the dock-light software.

 4 Days
 Beginner
 9500

LGEC016: DC Motor Speed Controller
The aim of developing this kit is to control the speed and direction of DC motor. PWM technique used to control the speed and direction by using switches. This kit is practical and highly feasible in economic point of view.

 4 Days
 Beginner
 5000

LGEC020: Speed checker for Highway
In this kit the main objective of the Speed checker and over speed detection for Highways have a vehicle speed limit on them. Because of safety considerations it is important that these regulations are properly implemented.

 4 Days
 Intermediate
 6000

LGEC023: Cellphone controlled devices
The main aim of this DTMF Based Device Controlling System project is to controlling the house holding electrical devices like fan, electrical bulb etc. From any where we can control these devices by using mobile phones.

 3 Days
 Intermediate
 7000

LGEC025: Electronic Voting Machine (EVM)
This kit is an effort to design a prototype of an EVM which stores the user data. After the voting has been done the system demands a unique password to read the voting data that is the number of votes each candidate has got.

 3 Days
 Intermediate
 6000

LGEC027: Password based access control
The system has a Keypad by which the password can be entered through it. When entered password matches with the password stored in the memory then the relay gets on and so that the door is opened.

 3 Days
 Beginner
 7500

LGEC028: Automatic Control with power saving
The main aim of this kit to construct a control system that can regulate (turn on/off and control speed) various common home appliances like Heater, Fan, Air Conditioner and Fire Alarm based on room temperature at that time.

 3 Days
 Intermediate
 8000

LGEC030: Wireless secured data transmission
This kit is used to communicate or transmit a text message from one place to another place through wireless. The text message is encrypted by using the Microcontroller and the encrypted message was transmitted through wireless

 4 Days
 Intermediate
 8000

L;GEC031: Encrypted & Secure Gate control
In this system we are using RF technology to make a wireless remote through which we can control the door in a definite range. The authenticated user who knows the password will have to send a particular sequence of code from remote end.

 3 Days
 Beginner
 8000

LGEC032: Smart kitchen
In this kit the data coming from the gas sensor and temperature sensor is given to the microcontroller continuously. The microcontroller reads the data and processed it to check for gas leakage and high temperature conditions.

 3 Days
 Intermediate
 7000

LGEC033: Wireless Stepper Motor Controller
In this system we are using RF technology to make a wireless remote through which we can control the stepper motor in a definite range without touching for its different operations like direction and speed control.

 3 Days
 Advanced
 5500

LGEC034: RF Based Toll Tax Automation
This system allows the vehicle drivers to pass the toll tax booths without stopping at the toll booths. The toll amount is deducted from the RFID card. This RFID card is rechargeable and account is stored on the records.

 4 Days
 Intermediate
 9000

LGEC035: RF Remote Control For AC Devices
In this system we are using RF technology to make a wireless remote through which we can control the devices in a definite range without touching it.

 4 Days
 Beginner
 8000

LGEC037: Automatic Parking Fee Collection
In this kit when you at parking site, you see the number of parking and available parking at the entry gate, if parking is available then transmit your id at the entry of gate, if you have enough balance the gate is open for few second and parking fee is credited from your card.

 4 Days
 Expert
 9000

LGEC039: Sensor Based Patient Need Intimation
This is the best useful kit for those persons who are fully paralyzed. Only by the movement of their any part the body they can convey any message to us on LCD. Here we are transmitting the data wirelessly so the patient can be anywhere within the range of the device.

 3 Days
 Intermediate
 9000

LGEC040: Smart tourist guide
This projects based on RF technology The 4 bit of unique data is decoded and location is identified from a predefined table made for each location. The corresponding location name for each id is displayed on the LCD.

 3 Days
 Intermediate
 8000

LGEC041: Accelerometer based Video Game
This kit is being designed to bring the RF technology. Here we have used a snake game which has been developed in VB6.0 and our interfacing is also in the same software serially.

 3 Days
 Intermediate
 9000

LGEC042: Intelligent room automation
This kit is being the feature of auto on/of light also depend upon if the person is available in the room i.e. if the person enters the room and also the light intensity is less then only light will glow.

 3 Days
 Intermediate
 8500

LGEC043: Intelligent Office automation
This device is an intelligent system which can control devices (namely heater, fan, A.C.) based on room temperature. When room temperature is very low it turns on the heater. At medium temperature ranges it turns on fan. At higher temperature ranges it turns on the Air Conditioner.

 3 Days
 Advanced
 8500

LGEC045: Smart Vehicle Using DTMF
In the kit car automation with obstacle avoidance we will be designing an electronic interface, in which you can control any system from remote location by using your mobile phone.

 4 Days
 Intermediate
 9000

LGEC049: IP based device control
This kit IP based device control details a design for controlling devices through network. By the implementation of the design, one can control various electrical devices.

 3 Days
 Intermediate
 9000

LGEC052: Advance Security System
The intent of this kit Advance security system is to design a system for security purpose which is loaded with various features like camera activation, light activation on person detection automatically, motion detection, alarm etc.

 3 Days
 Advanced
 10000

LGEC055: Password Based Door Lock System
In this kit Door lock system a keypad is attached to the door for opening and closing operations of the door. After entering the code, if that code matches with the predefined one, then the door will unlock for a limited period of time.

 4 Days
 Intermediate
 8000

LGEC056: Wireless DC motor controller
In this kit we are using RF technology to make a wireless remote through which we can control the DC motor in a definite range without touching for its different operations like direction and speed control. This kit is actually an educational kit.

 3 Days
 Intermediate
 7500

LGEC057: Automatic irrigation system
There is sensing probes installed into the soil. These probes will sense the content of water in the soil. This data is sensed by the controller to check the soil condition and display it on the LCD and also control the pump motor via relay and relay driver.

 3 Days
 Intermediate
 10000

LGEC058: PC controlled stepper motor
In this kit there are a button (Graphical user interface designed in PC) to give the command to the controller for operation of the motor such as motion in forward direction or backward direction and controlling the speed by varying the delay between the signals.

 4 Days
 Advanced
 8200

LGEC059: Dam Shutter Control
In the kit dam shutter control to design an electronic system which can check the level of water in the river and according open and close the dam shutter to manage the flow and prevent the disaster.

 4 Days
 Intermediate
 9500

LGEC060: PS2 interfacing of microcontroller
In this kit, we are using a keyboard to display the message directly on the LCD PS2 communication. In this technology, the keyboard is connected to the microcontroller directly through PS2 port.

 3 Days
 Beginner
 7000

LGEC061: Fastest Finger First
In this system the user has to just press the switches. The sequence of the switch presses will be displayed on the LCD but the person who has pressed first his LED will only glow. The whole system can be reset when required.

 3 Days
 Intermediate
 7500

LGEC064: Voice operated home appliances
Controlling appliances is a main part in automation. In future, voice recognition technique will be the method for controlling appliances, computers. We are using the USB to UART interface and controller and interface for the device control. We will control 4 devices as prototype.

 4 Days
 Advanced
 8500

LGEC065: Automatic Three Phase Changeover
This kit is a prototype for the same which is auto change over to generator when main supply fails. In this system we are designing an embedded circuit to control this. In case there are three phases, then the switching will be in the default phase. Three relays are there to control the switching.

 4 Days
 Advanced
 8500

LGEC066: Digital attendance system
In this kit we take the attendance from various students in ascending order and the data is stored corresponding to each roll no. It can be either present, absent or none. The data is stored in the EEPROM of the microcontroller and it is transmitted serially via the USB to the microcontroller.

 4 Days
 Intermediate
 7500

LGEC069: Automatic Power Grid Controller
Automation of systems has become the demand of the day. In automatic power grid power grid and different units are controlled on the basis of time.

 3 Days
 Intermediate
 9000

LGEC072: Wireless AC Fan Regulator
In this kit I am using this same principle to vary the speed of any 1 phase AC motor by varying phase angle of applied AC waveform. The phase angle is varied using DIAC and TRIAC only but DIAC and TRIAC are triggered by digital means using 8051 microcontroller.

 3 Days
 Intermediate
 9000

LGEC073: Lighting Protocol
In the kit lighting protocol based on master slave controllers we are working on is based on the same protocol i.e. to control the intensity of the light. This is just the demo of how one can control the intensity of light by a microcontroller. We are showing this by using two light bulbs.

 4 Days
 Intermediate
 8500

LGEC084: Automatic Vehicle Turning Indicator
In the kit automatic vehicle indicator we are working on is based on the when the user presses the button for left or right turn led starts blinking and the buzzer starts making its sound. Whenever the IR sensors sense the turn it sends out the signal to the microcontroller which then according to the program regulate led and buzzer.

 4 Days
 Advanced
 7000

LGEC077: Ultra advanced parking system
In this project the system is designed such that, it will always show the nearest parking slot always. Hence it becomes more effective parking system.

 3 Days
 Beginner
 7500

LGEC093: Intelligent train system
In the kit intelligent train system the idea is whenever any engine observes a red signal on its track it will start decreasing its speed gradually and stops automatically at some distance from the signal pole. After then when it gets green signal the driver can manually start the train and go on.

 4 Days
 Intermediate
 9000

LGEC197: File management system
In the kit file management system it becomes extremely difficult to find some specific book or files from a rack of files or books. Here have divided the arrangement into number of racks, and each rack will have some specified books only.

 4 Days
 Beginner
 9500