• Any Questions? Call Us: +91 522 4026611
Get social with us!

LGME001: Compact Electric Robot car with suspension
This project, “Compact Electric Robot Car with Suspension”, is designed and developed to demonstrate a car which is capable of crossing over all the obstacles that comes in its path with adequate speed and carry any electronic equipment which can be used in application of home security systems, off road driving as well as military operations and surveillance.

 3 Days
 Beginner
 5500

LGME002: Renewable Energy Generator- Wind Turbine
This Project, “Renewable Energy Generator- Wind Turbine”, generates electricity when the motor is driven by the rotor of turbine. A wind turbine works like a high-tech version of an old-fashioned windmill. The wind blows on the angled blades of the rotor, causing it to spin, converting some of the wind’s kinetic energy into mechanical energy.

 3 Days
 Intermediate
 4000

LGME003: Stair Climbing Planetary Robot
This Project, “Stair Climbing Planetary Robot”, is a mechanism which can easily climb up or down the stairs and can be used in a variety of applications across many industries. A planetary gear system is used, which helps the robot to climb the stairs. Here, we have used four different DC motors for each arm which contains a set of wheels.

 3 Days
 Intermediate
 10000

LGME004: Manual Compressor Pump
This Project, “Manual Compressor Pump”, is primarily intended for demonstration of the pressure testing of new domestic heating installations prior to their connection to the boiler and also, for finding leaks, faulty lines and identifying air ingress problems in existing systems.

 3 Days
 Advanced
 5500

LGME005: Power Generation using Speed breaker
This Project, “Power Generation Using Speed Breaker”, is designed and developed as a concept which can be used on roads (speed breakers). A roller is placed in such a way that, when any vehicle passes over the speed breakers, it absorbs the kinetic energy from the vehicle and rotates the shaft of generator which generates electricity.

 3 Days
 Beginner
 4000

LGME006: Copy Carver
This Project, “Copy Carver”, is best suited for small scale industries and crafting. It is a cost effective and easy to handle model and gives fail-safe productivity. It also duplicates your original carvings or any 3D object in minutes......not hours!!

 3 Days
 Intermediate
 8000

LGME008: Artificial Hand
This project, “Artificial Gripper”, is a design of an artificial hand which is capable to mimic the natural motion of the human fingers. The main goal of this project is to represent an integrated design approach between mechanics and controls applied to an actuated artificial hand for robotic and prosthetic applications.

 3 Days
 Advanced
 6000

LGME010: Regenerative Braking System
This Project, “Regenerative Braking System”, is an energy recovery mechanism which slows a vehicle or object by converting its kinetic energy into a form which can be either used immediately or stored until needed. This contrasts with conventional braking systems, where the excess kinetic energy is converted to unwanted and wasted heat by friction in the brakes.

 3 Days
 Beginner
 8500

LGME011: Wind mill
This Project, “Wind mill”, is a resource of non-conventional energy that converts the energy of wind into rotational energy by means of vanes called blades. The main objective of design and development of this project is to build a wind power generator, using a wind mill, which rotates by absorbing the power of wind and acts as a prime mover to rotate a generator.

 3 Days
 Beginner
 8000

LGME012: Wireless Motorized screw jack
This Project, “Wireless Motorized Screw Jack”, is a portable type of jack that is operated by turning a lead screw. In the form of a screw jack, it is commonly used to lift moderately heavy weights. It is a prototype model to represent the idea which we can implement in industrial application, for example Material Lifting in assembly Line, In Automobile industries, Maintenance of heavy objects etc.

 3 Days
 Intermediate
 5000

LGME013: Motorized screw jack
This Project, “Motorized Screw Jack”, is a device used to fully or partially lift, lower or position an object. Screw jacks are often found in machine shops, auto repair facilities and in the automotive racing industry. Many vehicles also have a screw jack included with the spare tire kit, so drivers can repair a tire easily. Very large screw jack systems are even used to lift houses for foundation repair or replacement.

 3 Days
 Intermediate
 4000

LGME014: Hydraulic Arm Using Syringe
This Project, “Hydraulic Arm Using Syringe”, works on the principle of Pascal’s Law. It uses fluid (hydraulic) power in a confined space to do useful work, reduce human effort and pick and place any object. As hydraulic pumps and pistons are too costly, complex in working and rarely available, we have put our idea in the real life scenario using medical syringe as hydraulic piston to build a working prototype.

 3 Days
 Expert
 5000

LGME016: Road Power Generation
This Project, “Road Power Generation”, is a demonstration of a mechanism which converts friction by vehicles on the road into stroke motion and this stroke motion is converted to rotary motion by a one- directional free wheel. The wheel rotates a generator via pulley wheel and this generates electricity.

 3 Days
 Intermediate
 8000

LGME017: Electromagnetic Brakes
This Project,” Electromagnetic Brakes”, also called electro-mechanical brakes or EM brakes slow or stop motion using electromagnetic force to apply mechanical resistance (friction). This is a contactless system without any friction pads in this system. It means there is no wear of brake pads and maintenance is also reduced.

 3 Days
 Intermediate
 7500

LGME018: Dual Power Source As Wind And Solar Power
This project, “Dual Power Source As Wind And Solar Power” is an innovative wind and solar powered hybrid power generation concept which can not only produce light by using renewable energy, also it’s a boost to an everyday object that can operate completely off-grid.

 3 Days
 Expert
 10000

LGME019: Automatic street light controller with road power generation
This Project,” Automatic street light controller with road power generation”, is a demonstration of a mechanism which converts friction by vehicles on the road into stroke motion and this stroke motion is converted to rotary motion which rotates a generator and generates electricity. A special feature of this model is that it maintains the intensity of the street light according to the change in natural light.

 3 Days
 Beginner
 9000

LGME020: Scotch Yoke Multi Operation Machine
This Project, “Scotch Yoke Multi Operation Machine”, works on the principle of Scotch –Yoke mechanism which is converting the linear motion of a slider into rotational motion, or vice versa. The piston or other reciprocating part is directly coupled to a sliding yoke with a slot that engages a pin on the rotating part.

 3 Days
 Intermediate
 6000

LGME022: Power generation using suspension
This Project, “Power generation using suspension”, is basically a new concept of non-conventional energy generation. It is an electro-mechanical energy generating machine in which reciprocating motion from suspension is converted in to rotary motion. The rotational power is stored in flywheel which rotates a dynamo, which generates electricity.

 3 Days
 Intermediate
 8000

LGME023: Propeller Car
This Project, “Propeller Car”, has a type of fan that transmits power by converting rotational motion into thrust. A pressure difference is produced between the forward and rear surfaces of the airfoil-shaped blade, and a fluid (such as air or water) is accelerated behind the blade. Propeller dynamics can be modeled by both Bernoulli's principle and Newton's third law.

 3 Days
 Expert
 5000

LGME009: Artificial Hand With Gripper
This project, “Artificial Hand with Gripper”, is a design of an artificial hand which is capable to mimic the natural motion of the human fingers. The main goal of this project is to represent an integrated design approach between mechanics and controls applied to an actuated artificial hand for robotic and prosthetic applications.

 3 Days
 Advanced
 7000

LGME027: Rain Sensor Windshield wiper
This Project, “Rain Sensor Windshield Wiper”, is a mechatronic system which consists of a combination of electronics and mechanical system to work together. It is a system which is fully equipped with sensors circuit and a DC motor specially designed for Automobile vehicles.

 3 Days
 Beginner
 6000

LGME028: Hand operated mixer machine
This Project, “Hand operated mixer machine” is an idea of conservation of electrical energy. We can save electrical power by introducing this idea in real practice. The main aim of this project is to save the electrical power, time consumption during preparation of raw materials for cooking food.

 3 Days
 Beginner
 7500

LGME029: Four wheel steering
This Project, “Four wheels steering”, is an application of steering of a car designed to reduce the overall turning radius of the vehicle. It uses mechanical linkages and coupling agents to connect the front steering axle to the rear steering axle. When the driver steers the car, the direction in which the front wheels turn is opposite the direction in which the rear wheels turn.

 3 Days
 Intermediate
 6000

LGME032: Mechanical Spider
This Project, “Mechanical Spider”, demonstrates a walking device adapted to simulate a gait of a legged animal. It is an innovative design which could travel over all the obstacles that come in the path with an adequate speed and carry any electronic equipment which can be use in course of military operations and surveillance.

 3 Days
 Advanced
 7500

LGME033: Mechanical Spider ( wireless)
This Project, “Mechanical Spider (wireless)”, demonstrates a walking device adapted to simulate a gait of a legged animal. It is an innovative design which could travel over all the obstacles that come in the path with an adequate speed and carry any electronic equipment which can be use in course of military operations and surveillance.

 3 Days
 Intermediate
 8500

LGME038: Motorized Hand Hacksaw Cutting Machine using Motor
This Project, “Motorized Hand Hacksaw Cutting Machine using Motor” is used to cut large sizes (sections) of metals such as steel. Cutting diameters of more than 10/15mm is very hard work with a normal hand held hacksaw. Therefore, power hacksaws have been developed to carry out the difficult and time consuming work.

 3 Days
 Beginner
 7500

LGME039: Universal Drilling Machine
This Project, “Universal Drilling Machine”, is a very useful tool for drilling in three Dimensions. The entire assembly can mounted on a table or a wall. Also, it can be easily fastened to a work bench or table using simple fastening clamp.

 3 Days
 Intermediate
 4500

LGME040: Scissor lift with trolley
This Project, “Scissor lift with trolley”, is a device used for lifting, lowering and positioning any objects. The main objective is to make the table adjustable to desirable height. In this model, a motor is used to fold and unfold the structure. This scissor lift can be used only for average load, because the higher the load, higher the efforts required.

 3 Days
 Advanced
 5000

LGME041: Scissor lift with trolley (Wireless)
This Project, “Scissor lift with trolley (Wireless)”, is a device used for lifting, lowering and positioning any objects. The main objective is to make the table adjustable to desirable height. Being wireless increases its efficiency, speed and accuracy on which person can rely.

 3 Days
 Beginner
 6000

LGME042: Four Legged Walking Machine
This Project, “Four Legged Walking Machine”, is a four legged walking robot. It is a new concept in robots, designed with mechanical and electrical components and differs from conventional robot design in how the body and the legs move.

 3 Days
 Expert
 7500

LGME043: Adaptive Head Light
This Project, “Adaptive Head Light”, is designed and implemented with a headlight system having three additional features beyond the scope of the average cars lighting system. Adaptive headlight system definitely increases visibility at night, reduce accidents.

 3 Days
 Beginner
 6000

LGME044: Four Axis Hydraulic JCB using Syringe
This Project, “Four Axis Hydraulic JCB using Syringe”, demonstrates a simple four axis JCB excavator’s big arm. Arm mounted on front side of flat plate form can move up and down. All movements are connected by syringes through hydraulic pressure.

 4 Days
 Expert
 5500

LGME045: Four Axis hydraulic JCB using Syringe with Motor
This Project, “Four Axis hydraulic JCB using Syringe with Motor”, demonstrates a simple four axis JCB excavator’s big arm. Arm mounted on front side of flat plate form can move up and down. All movements are connected by syringes. Here, we have used DC Motors for pulling and pushing the syringe lever instead of manual operation.

 4 Days
 Expert
 7000

LGME046: Four Axis Hydraulics JCB using Syringe with Motor and Crawler
This Project, “Four Axis Hydraulics JCB using Syringe with Motor and Crawler”, demonstrates a simple four axis JCB excavator’s big arm. Arm mounted on front side of flat plate form can move up and down. All movements are connected by syringes. Here, we have used DC Motors for pulling and pushing the syringe lever instead of manual operation.

 4 Days
 Expert
 8000

LGME047: Regenerative shoe Brakes
This Project, “Regenerative Shoe Brakes”, is an energy recovery mechanism which slows down the vehicle or object by converting its kinetic energy into electrical energy, which can be either used immediately or stored until needed.

 4 Days
 Advanced
 8500

LGME048: Barrel Lifter
This Project, “Barrel Lifter”, demonstrates a barrel lift which can be used to easily move materials and lift from lower position to upper position and vice versa. Trolley is light and portable as it consists of wheels and supporting fork lift column is raised or lowered using threaded rod (leadscrew).

 4 Days
 Beginner
 4500

LGME049: Rack and Pinion based Steering System
This Project, “Rack and Pinion based Steering System”, demonstrates the most common type of steering on cars, small trucks and SUVs. It is actually a pretty simple mechanism. A rack-and-pinion gear set is enclosed in a metal tube, with each end of the rack protruding from the tube. A rod, called a tie rod, connects to each end of the rack.

 4 Days
 Intermediate
 7500

LGME051: Vertical axis wind turbine
This Project, “Vertical axis wind turbine”, is a machine that converts the kinetic energy in wind into mechanical energy. If the mechanical energy is used directly by machinery, it is called a windmill. If the mechanical energy is converted to electricity, the machine is called a wind generator.

 4 Days
 Advanced
 7500

LGME052: Vertical axis wind turbine dual mode
This Project, “Vertical axis wind turbine dual mode”, is a machine that converts the kinetic energy in wind into mechanical energy. If the mechanical energy is converted to electricity, the machine is called a wind generator. It also consists of Solar Panel to trap solar energy from the sun and convert it into electricity.

 4 Days
 Intermediate
 9000

LGME054: Box Sliding Mechanism
This Project, “Box Sliding Mechanism”, is a conveyor machine based on 4 bar mechanism for easy transportation, handling and placement of objects in a manufacturing or packaging unit. The machine includes mechanical linkages, conveyor slots and electric motors assembled in a simple structure for the model to be efficient.

 4 Days
 Advanced
 8000

LGME050: Gearless Power Transmission System
The project “GEARLESS POWER TRANSMISSION” is compact and portable equipment, which is used to demonstrate the transmission of power at right angle without the use of any gear or gear drives.

 3 Days
 Expert
 9000

LGME015: Hydraulic Arm Using Syringe and Motor
This Project, “Hydraulic Arm Using Syringe and Motor”, works on the principle of Pascal’s Law. It uses fluid (hydraulic) power in a confined space to do useful work, reduce human effort and pick and place any object. As hydraulic pumps and pistons are too costly, complex in working and rarely available, we have put our idea in the real life scenario using medical syringe as hydraulic piston and dc geared motor as pump.

 3 days
 Expert
 7000

LGME021: Power Generation using See-Saw
This project, “Power Generation using See-Saw”, is a proof of concept work, where playground equipment is implemented for power generation. In using a seesaw design, this project is able to show how a simple mechanical motion could be transformed into electrical power. A seesaw power generator is designed and constructed to demonstrate its feasibility.

 3 days
 Intermediate
 4000

LGME024: Pneumatic Crusher
This Project, “Pneumatic Crusher”, demonstrates crushing process which is a main part of the Wastage Collecting industries. Crushers may be used to reduce the size, or change the form, of waste materials so they can be more easily disposed of or recycled.

 3 days
 Expert
 11000

LGME026: Hydraulic Punching Machine
This Project, “Hydraulic Punching Machine”, is a proposed work that describes the design and fabrication of prototype of automatic punching machine and shedding light on the working principle and the hardware structure of the system. Punching or pressing process is one of the most important and necessary processing step in sheet metal industry.

 3 days
 Expert
 11000

LGME030: Pneumatic Car
This Project, “Pneumatic Car”, demonstrates the application of compressed air as a source of energy and as a non-polluting fuel in driving an automobile. It is a compressed-air vehicle (CAV) powered by an air engine, using compressed air, which is stored in a tank.

 3 days
 Expert
 13000

LGME031: Four wheel steering using gear and motor
This Project, “Four wheel steering using gear and motor”, is a geometric arrangement of gears in the steering of a vehicle designed to solve the problem of wheels on the inside and outside turning of vehicle in different radius. This steering is quickly becoming the most common type of steering on cars, small trucks.

 3 days
 Advanced
 7000

LGME034: Motorized Hydraulic Jack
This Project, “Motorized Hydraulic Jack”, relates to hydraulic jack and more specifically to an automobile or motorized hydraulic jack system. In most of the garages the vehicles are lifted by using screw jack. This needs high man power and skilled labors. It is an object of the development to provide an upgraded hydraulic jack system that only utilizes manually operated hydraulic jacks.

 3 days
 Advanced
 7000

LGME053: Solar Spray Mechanism
This Project, “Solar Spray Mechanism“, demonstrates the application of solar energy which plays an important role in drying agriculture products and for irrigation purpose for pumping the well water in remote villages without electricity.

 3 days
 Advanced
 8500

LGME058: Automated Car Parking System
This Project, “Automated Car Parking System”, demonstrates the practical solution of an alarming problem which is growing exponentially throughout the globe. Traffic congestion, car parking issues, weekend rush, no parking spaces are few of the major problems which has to be addresses immediately using an efficient mechanical system.

 3 days
 Advanced
 8000

LGME060: Compressed Air Engine
This Project, “Compressed Air Engine”, demonstrates the application of compressed air combined with various engineering concepts applied together. The model consists of low cost easily available materials and components which is assembled together to form an automatic system of compressed air engine.

 3 days
 Expert
 15000

LGME035: Pneumatic Sheet Metal Cutting Machine
This Project, “Pneumatic Sheet Metal Cutting Machine”, aims at design and development of a simple pneumatically controlled sheet metal cutting machine for application at small and medium scale industries as well as mechanical laboratories.

 3 days
 Expert
 11000