• Any Questions? Call Us: +91 522 4026611
Get social with us!

LGEC031: Encrypted & Secure Gate Control
In this system we are using RF technology to make a wireless remote through which we can control the door in a definite range. The authenticated user who knows the password will have to send a particular sequence of code from remote end.

 10 hrs
 Intermediate
 8000

LGEC004: Bus Tracking System
In the kit "ON Route Bus Tracking System" we can track the bus at any location by receiving id. For further improvement we can integrate all the collected data from different locations and make a database of it.

 4 Days
 Intermediate
 8000

LGEC006: Wireless water level controller
In this kit Wireless Automatic water level controller switches ON the motor when the water level is below on low level and puts off the motor when water level rises up to high level. And level display on LCD at receiver end.

 4 Days
 Intermediate
 9000

LGEC008: Smart Advertisement Board
This kit is a "GSM Based advertisement board" GSM modem is used for receiving and sending SMS. When a user wants to display a notice on the notice board, user will send SMS from a mobile number and SMS received is displayed on LCD.

 4 Days
 Expert
 10500

LGEC010: GSM Based Access Controlled Lock
In the kit access controlled lock system, when unauthorized person tries to open the gate and enters the wrong password, the alarm gets triggered and a SMS is sent to the registered user. The user can take any proper action.

 4 Days
 Expert
 13000

LGEC013: Military Radar Using IR
This project is used to security purpose. The kit automatically detects the any moving person. If any person in front of IR then detect that and stepper motor will be stop. deflection angle will be display on LCD.

 4 Days
 Intermediate
 6000

LGEC016: DC Motor Speed Controller
The aim of developing this kit is to control the speed and direction of DC motor. PWM technique used to control the speed and direction by using switches. This kit is practical and highly feasible in economic point of view.

 4 Days
 Beginner
 5000

LGEC019: Smart Fan - A Human Tracking Fan
This kit consists of two PIR Sensors which can detect person sitting position and automatic rotate the fan towards human. If both PIR sensor detects the human then fan rote one by one continue. If do not detect any person ,fan will be stop.

 4 Days
 Intermediate
 9000

LGEC020: Speed checker for Highway
In this kit the main objective of the Speed checker and over speed detection for Highways have a vehicle speed limit on them. Because of safety considerations it is important that these regulations are properly implemented.

 4 Days
 Intermediate
 6000

LGEC022: SMS based voting machine
In this kit we are presenting about the voting system via SMS. Using SMS based voting system we can vote from our home just by sending a SMS in a particular format from our mobile.

 4 Days
 Expert
 10500

LGEC023: Cellphone controlled devices
The main aim of this DTMF Based Device Controlling System project is to controlling the house holding electrical devices like fan, electrical bulb etc. From any where we can control these devices by using mobile phones.

 3 Days
 Intermediate
 7000

LGEC025: Electronic Voting Machine (EVM)
This kit is an effort to design a prototype of an EVM which stores the user data. After the voting has been done the system demands a unique password to read the voting data that is the number of votes each candidate has got.

 3 Days
 Intermediate
 6000

LGEC033: Wireless Stepper Motor Controller
In this system we are using RF technology to make a wireless remote through which we can control the stepper motor in a definite range without touching for its different operations like direction and speed control.

 3 Days
 Advanced
 5500

LGEC046: Bluetooth based smart House
The main objective of this kit is to design a system with the help of which we can control the home appliances using computer as master control using computers Bluetooth feature.

 4 Days
 Expert
 9800

LGEC054: RFID Based Library Management
This kit is an effort to designing a prototype library management system based on RF ID card to directly know the book and check out the entire book to keep the record of book issued based on the RF ID. The book will have the unique ID tag installed. This tag will receive by the RF ID reader and sent to the PC.

 4 Days
 Advanced
 9500

LGEC056: Wireless DC motor controller
In this kit we are using RF technology to make a wireless remote through which we can control the DC motor in a definite range without touching for its different operations like direction and speed control. This kit is actually an educational kit.

 3 Days
 Intermediate
 7500

LGEC057: Automatic irrigation system
There is sensing probes installed into the soil. These probes will sense the content of water in the soil. This data is sensed by the controller to check the soil condition and display it on the LCD and also control the pump motor via relay and relay driver.

 3 Days
 Intermediate
 10000

LGEC062: Prepaid electricity energy meter
This kit is prepaid that is recharge and use. The recharge can be done by entering a unique password and then amount via keypad. There are recharge tag to be typed through keypad which will act as the recharge code as prototype.

 4 Days
 Advanced
 8500

LGEC067: Solar Sun Seeker
This system is tracking for maximum intensity of light. When there is decrease in intensity of light, this system automatically changes its direction to get maximum intensity of light.

 4 Days
 Expert
 7000

LGEC069: Automatic Power Grid Controller
Automation of systems has become the demand of the day. In automatic power grid power grid and different units are controlled on the basis of time.

 3 Days
 Intermediate
 9000

LGEC073: Lighting Protocol
In the kit lighting protocol based on master slave controllers we are working on is based on the same protocol i.e. to control the intensity of the light. This is just the demo of how one can control the intensity of light by a microcontroller. We are showing this by using two light bulbs.

 4 Days
 Intermediate
 8500

LGEC086: Smart card based chalan system
This kit smart card based chalan system is an effort to designing a prototype challan system based on RF ID where user vehicle/user can easily be identified and the SMS challan will be sent to the user via GSM modem.

 4 Days
 Expert
 13000

LGEC089: SMS based vehicle ignition system
In the kit SMS based vehicle ignition system oo control ignition (on or off), we have to send just a sms in a particular format, as soon as the sms gets received by the microcontroller

 4 Days
 Advanced
 11000

LGEC091: SMS controlled stepper motor
Here we designed and electronic control unit using which we can control the stepper motor (speed and direction) remotely just by sending SMS from our mobile. The SMS in sent in a definite format hence can be controlled by definite user.

 4 Days
 Expert
 10000

LGEC092: SMS Controlled DC Motor
To control the DC motor operation (speed and direction), we have to send just a SMS in a particular format, as soon as the SMS gets received by the microcontroller; it fetches the particular data from the SMS, and controls the motor accordingly.

 4 Days
 Advanced
 11000

LGEC097: Human sensed automatic door control
In the kit human sensed automatic door control in some area where we need only humans to enter, we can use this type of system. Here we have used PIR sensor to detect human beings. As a person is detected by the sensor, the gate gets opened for some time and then gets closed automatically.

 4 Days
 Intermediate
 9000

LGEC103: Wireless encrypted data transmission
This project is used to communicate or transmit a text message from one place to another place through wireless RF medium. The text message entered via keyboard is encoded by microcontroller and the written (encoded) message will be transmitted through wireless.

 4 Days
 Intermediate
 10000

LGEC110: Industrial Automation
In this kit Industrial automation we are controlling the system with the help of touch screen. As we press the button on touch screen it generates signals and sends them to the microcontroller. The microcontroller sends the proper data to relay driver.

 4 Days
 Advanced
 9500

LGEC111: Wireless Industrial Automation
In this prototype we are controlling the system with the help of touch screen. As we press the button on touch screen it generates signals and sends them to the microcontroller and sends it to input section of RF transmitter where it is encoded and transmitted

 4 Days
 Advanced
 10500

LGEC112: Home Automation System
The kit Home automation system is the use of one or more touch screen to control basic home functions and features automatically and sometimes remotely. An automated home is sometimes called a smart home

 4 Days
 Expert
 9500

LGEC113: Wireless Home Automation System
In this kit wireless Home automation we are controlling the system with the help of touch screen. As we press the button on touch screen it generates signals and sends them to the microcontroller and sends it to input section of RF transmitter where it is encoded and transmitted

 4 Days
 Expert
 10500

LGEC116: Wireless control DC motor
The aim of this kit wireless control DC motor is to use design and construct a user friendly module that can be used to control the direction and speed of the DC motor based on touch screen technology.

 4 Days
 Advanced
 10000

LGEC118: Wireless control Stepper motor
The aim of this kit Wireless control stepper motor is to use design and construct a user friendly module that can be used to control the direction and speed of the stepper motor based on touch screen technology wirelessely.

 4 Days
 Advanced
 10000

LGEC128: Keypad security system
The kit keypad based security system concerned here can be used in safe Security projects by industries The device uses a touch screen to send a code of information or a password assigned to the microcontroller On receiving the correct password.

 4 Days
 Intermediate
 10500