• Any Questions? Call Us: +91 522 4026611
Get social with us!

LGEC002: RF Remote Controlled Door Lock
The main objective of this project to make a wireless remote through which can control the door. The user will have to send password from remote end; the door will be opened for a definite time interval and will be closed automatically.

 4 Days
 Advanced
 8000

LGEC004: Bus Tracking System
In the kit "ON Route Bus Tracking System" we can track the bus at any location by receiving id. For further improvement we can integrate all the collected data from different locations and make a database of it.

 4 Days
 Intermediate
 8000

LGEC006: Wireless water level controller
In this kit Wireless Automatic water level controller switches ON the motor when the water level is below on low level and puts off the motor when water level rises up to high level. And level display on LCD at receiver end.

 4 Days
 Intermediate
 9000

LGEC009: Unique Identification System
In this project there will be a unique id tag for each item. The receiver keeps on receiving the id of items uniquely. If any items is not in the range, means that product id is not display on LCD.

 4 Days
 Beginner
 8000

LGEC014: Wireless Home Automation
The basic idea behind this kit is device control using computer wirelessly. A USB to serial converter module to interface the PC to Microcontroller. The user control the devices by sending Any ASCII code through the dock-light software.

 4 Days
 Beginner
 9500

LGEC030: Wireless secured data transmission
This kit is used to communicate or transmit a text message from one place to another place through wireless. The text message is encrypted by using the Microcontroller and the encrypted message was transmitted through wireless

 4 Days
 Intermediate
 8000

L;GEC031: Encrypted & Secure Gate control
In this system we are using RF technology to make a wireless remote through which we can control the door in a definite range. The authenticated user who knows the password will have to send a particular sequence of code from remote end.

 3 Days
 Beginner
 8000

LGEC033: Wireless Stepper Motor Controller
In this system we are using RF technology to make a wireless remote through which we can control the stepper motor in a definite range without touching for its different operations like direction and speed control.

 3 Days
 Advanced
 5500

LGEC034: RF Based Toll Tax Automation
This system allows the vehicle drivers to pass the toll tax booths without stopping at the toll booths. The toll amount is deducted from the RFID card. This RFID card is rechargeable and account is stored on the records.

 4 Days
 Intermediate
 9000

LGEC035: RF Remote Control For AC Devices
In this system we are using RF technology to make a wireless remote through which we can control the devices in a definite range without touching it.

 4 Days
 Beginner
 8000

LGEC037: Automatic Parking Fee Collection
In this kit when you at parking site, you see the number of parking and available parking at the entry gate, if parking is available then transmit your id at the entry of gate, if you have enough balance the gate is open for few second and parking fee is credited from your card.

 4 Days
 Expert
 9000

LGEC039: Sensor Based Patient Need Intimation
This is the best useful kit for those persons who are fully paralyzed. Only by the movement of their any part the body they can convey any message to us on LCD. Here we are transmitting the data wirelessly so the patient can be anywhere within the range of the device.

 3 Days
 Intermediate
 9000

LGEC040: Smart tourist guide
This projects based on RF technology The 4 bit of unique data is decoded and location is identified from a predefined table made for each location. The corresponding location name for each id is displayed on the LCD.

 3 Days
 Intermediate
 8000

LGEC041: Accelerometer based Video Game
This kit is being designed to bring the RF technology. Here we have used a snake game which has been developed in VB6.0 and our interfacing is also in the same software serially.

 3 Days
 Intermediate
 9000

LGEC056: Wireless DC motor controller
In this kit we are using RF technology to make a wireless remote through which we can control the DC motor in a definite range without touching for its different operations like direction and speed control. This kit is actually an educational kit.

 3 Days
 Intermediate
 7500

LGEC063: Development of Smart Blind Stick
The kit advance blind stick consists of stick with many advance features like automatic obstacle presence detection with audio alarm, water body detection in front of the blind person with alarm. If the stick is lost there is small remote through which the person can track the blind stick.

 4 Days
 Expert
 8500

LGEC072: Wireless AC Fan Regulator
In this kit I am using this same principle to vary the speed of any 1 phase AC motor by varying phase angle of applied AC waveform. The phase angle is varied using DIAC and TRIAC only but DIAC and TRIAC are triggered by digital means using 8051 microcontroller.

 3 Days
 Intermediate
 9000

LGEC093: Intelligent train system
In the kit intelligent train system the idea is whenever any engine observes a red signal on its track it will start decreasing its speed gradually and stops automatically at some distance from the signal pole. After then when it gets green signal the driver can manually start the train and go on.

 4 Days
 Intermediate
 9000

LGEC101: Wireless health monitoring
The system is design of temperature monitoring of patient body wirelessly using multiple sensor network and receiving the data at remote end

 4 Days
 Intermediate
 8000

LGEC103: Wireless encrypted data transmission
This project is used to communicate or transmit a text message from one place to another place through wireless RF medium. The text message entered via keyboard is encoded by microcontroller and the written (encoded) message will be transmitted through wireless.

 4 Days
 Intermediate
 10000

LGEC105: Wireless notice board
The main objective of this kit wireless notice board is to design a system with the help of which we can display the data on a display device by writing the data in PC. The interface is should be easy so that a lay person can also use the system effectively.

 4 Days
 Beginner
 9000

LGEC119: Automatic Wireless Power Grid
In this kit automatic wireless power grid we are controlling the grids with the help of switches. Actually the transmitting end is interfaced to the switches. As we set the time it generates signals and sends them to the microcontroller and sends it to input section of RF transmitter where it is encoded and transmitted with help of antenna.

 4 Days
 Intermediate
 10000

LGEC154: Tire pressure monitoring system
The kit aims at developing a TPMS (Tire Pressure Monitoring System), which displays the tire pressure onto a LCD wirelessly. The proposed system provides the facility of dynamically changing the tire pressure limit setting.

 4 Days
 Beginner
 10000

LGEC176: Temperature monitoring and logging system
The kit temperature monitoring and logging system is designed to make a system that reads data from two temperature sensors and sends these values to a computer.

 4 Days
 Advanced
 9500

LGEC193: RF based industrial automation
Here we are monitoring these two parameters and transmitting its values on the other end wirelessly. There is controlling elements in the system also, for this reason we have used two relays corresponding to temperature and pressure.

 4 Days
 Beginner
 10000

LGKT016: Wireless Alarm
The objective of Kit Wireless Alarm Using RF Module is to design a security system which can be control wirelessly using RF module. In the kit Wireless Alarm Using RF Module HT12E encoder IC takes 4-bit binary sequence from the DIP switch.

 1 Days
 Beginner
 619

LGKT018: Wireless Direction Control of DC Motor
The main objective of the kit Wireless Direction Control of DC motor is to providing an efficient and simple method for the control direction of DC motor using RF. This kit uses RF modules.

 1 Days
 Advanced
 1099

LGKT030: Wireless Door Control System
The main idea of developing the kit RF based door control system is for providing an efficient and simple method for the control direction of DC motor using RF (Radio Frequency) technology or door control by using RF technologies.

 1 Days
 Advanced
 999

LGKT080: Wireless Data Transmission
In the kit Wireless Data Transmission (Bit Transmission) we will design a system to transmit digital sequence of 4- bit to the remote location and represents the signal 4 bit at receiver end.

 1 Days
 Advanced
 669